To install lights or fixtures, the electricians in Brisbane and its suburbs always follow certain safety guidelines because the work is risky. Moreover, following these suggestions or rules helps them complete the job accurately and conveniently. So, today, we will be discussing some of these guidelines to give you an overview of how electricians work safely in residential and commercial buildings.
- Inspecting the Wiring Before Commencing the Installation
The electrician appointed by a company offering lighting installation services in Brisbane and the other suburbs will need to inspect the wires and the entire electrical infrastructure to keep himself protected from electrical hazards.
Many electricians forget to turn off the power supply from the local or the main circuit board when installing lights. This generally leads to electrocutions or similar accidents. So, professionals will always need to follow this step before they start installing the lights.
- Check the Wires With a Voltage Tester
The electricians carrying out lighting installations in Springfield and other Brisbane suburbs will need to check whether there is static electricity present near the lighting fixture. They will have to use a voltage tester to detect the same before they can install the lights. Otherwise, static electricity can be quite dangerous and can cause several accidents.
- Install Lights That Do Not Exceed the Maximum Wattage
This is a very important safety guideline that the electricians will need to follow because installing lights in the fixture that exceed the maximum wattage can either cause a fire or they might simply burst. This might cause damage to the property and can even cause injuries to the electrician and the dwellers on the property.
- Use the Right Electrical Tools and Supplies
The next important safety guidelines that the electricians in Springfield also serving in other Brisbane suburbs follow is using the right electrical tools and supplies for installing the lights.
If they are installing lights in ceilings or places that are far above the ground, they will also have to use ladders and even safety ropes if required to prevent falls.
- Mounting a Fixture Requires Teamwork
To install a lighting fixture, the electrician will need to work with his assistant who will be holding the fixture so that he can install the wires safely. In fact, if the fixture is heavy, then the assistant needs to hold the same firmly so that the main electrician in Brookwater also serving in the other Brisbane suburbs can set up the wires properly.
- Checking the Junction Box of the Light Fixture After Installation
After the electrician installs the junction box, he needs to inspect it thoroughly to see whether it can support the weight of the lights that are to be installed. Also, if heavy lights such as a chandelier will be installed, they should mount the fixture to the ceiling joist.
- Turn Off the Main Power Circuit
A professional assigned to the emergency electrician service in Brisbane will always turn off the main power circuit before he can install the light. He will do this if there has been a previous case of fire outbreak, short-circuit or electrocution.
By following these guidelines, electricians efficiently install lights in properties.
Call Us Now for a Light Installation
To install a light on your property, call us at Mr Mirek Electrics now. We serve our clients 24/7 for their convenience.